PREVENTIVE EFFECT OF CRANBERRY GEL ON DENTIN SUBMITTED TO EROSION

Aims: Considering that Cranberry's components might inhibit dentin metalloproteinases exposed to erosive agents, the aim of this study was to evaluate in situeffect of a Cranberry gel application on dentin before an erosive challenge.Materials and methods: This crossover double-blinded study was performed in 2 phases of 5 days each, with 10 healthy volunteers who wore 2 palatal devices (1 for each phase) with 4 dentin specimens (2 specimens for each group). The groups under study were:First Phase: G1 -Erosivechallenge (Coca-cola®) over dentin without any previous treatment (1st negative control group); G2 -Erosive challenge over dentin previously treated with Cranberry gel (test group); and Second Phase: G3 -Erosive challenge over dentin previously treated with a gel without any active principle (2ndnegative control group); G4 -Erosive challenge over dentin previously treated with 0.12% Chlorhexidine gel (positive control group). Each device was immersed into the acid beverage, 3 times daily for 5 minutes during 5 days. Profilometry (µm) was used to quantify the dentin wear. Data were analyzed by Repeated Measures Analysis of Variance followed by Fisher's test (p<0.05).Results: Data (G1: 4.98 ± 1.36a; G2: 3.29 ± 1.16b; G3: 4.38 ± 1.19a; G4: 3.32 ± 1.55b) showed no statistical difference between G1 and G3. There was also no difference between G2 and G4. However, G2 and G4 presented lower wear when compared to G1 and G3, and this difference was statistically significant. Conclusion: The results of this studysuggest a significant efficacy of Cranberry gel in preventing wear of dentin subjected to dental erosion.

Rendimiento Clínico de las Restauraciones Adhesivas con Resina Compuesta en Casos de Pacientes con Desgaste Severo e Incremento de Dimensión Vertical: Revisión de Literatura Sistematizada / Clínical Performance of Adhesive Restorations with Composite Resin in Cases of Patients with Severe Wear and Increased Vertical Dimension: Systematized Literature Review

El desgaste dental severo se describe como la pérdida sustancial de la estructura dental, con exposición de la dentina y pérdida significativa de igual o más de 1/3 de la corona clínica. El uso de materiales compuestos de resina permite al clínico ser más conservador, debido a su aplicación mínimamente invasiva. Además de ello, son relativamente económicas, proporcionan buena estética general, así como un buen rendimiento y facilidad en la reparación. El objetivo de esta revisión de literatura sistematizada es recopilar información disponible en la literatura referente a cuál es el rendimiento clínico de las restauraciones adhesivas con resina compuesta en casos de pacientes con desgaste severo e incremento de la dimensión vertical como objetivo rehabilitador. Se analizaron artículos entre los años 2000 y 2022, seleccionando cuatro bases de datos (Pubmed, Scopus, Scielo y Web of Science). Para identificar los descriptores se utilizó los Medical subject headings (Mesh): Tooth Wear, Composite Restorations, Resin y Oral Rehabilitation. No se aplicó restricciones de idioma, país de origen, autor o lugar de publicación donde se realizó el estudio. Como resultado de la búsqueda se obtuvieron 71 artículos, de los cuales se seleccionaron 5 que cumplieron con los criterios de elegibilidad para ser considerados en la revisión de literatura sistematizada. Se encontró un promedio de tasa de éxito ente el 89,4 % - 100 % en un promedio total de 5.2 años de seguimiento. Se puede concluir, hasta donde se tiene conocimiento en la literatura científica disponible, que el tratamiento de restauraciones adhesivas con resinas compuestas en pacientes con desgaste severo es recomendable, enfocado en un periodo a corto-mediano plazo (3-5 años), siendo una opción de tratamiento económica y mínimamente invasiva.

Severe tooth wear is described as the substantial loss of tooth structure, with dentin exposure and significant loss of equal to or more than 1/3 of the clinical crown. The use of resin composite materials allows the clinician to be more conservative, due to its minimally invasive application. In addition to this, they are relatively inexpensive, provide good general aesthetics, as well as good performance and ease of repair. The objective of this systematic literature review is to collect information available in the literature regarding the clinical performance of adhesive restorations with composite resin in cases of patients with severe wear and increase in the vertical dimension as a rehabilitation objective. Articles between the years 2000 and 2022 were analyzed, selecting four databases (Pubmed, Scopus, Scielo and Web of Science). To identify the descriptors, the Medical subject headings (Mesh) were used: Tooth Wear, Composite Restorations, Resin and Oral Rehabilitation. No language, country of origin, author or place of publication restrictions where the study was conducted were applied. As a result of the search, 71 articles were obtained, of which 5 were selected that met the eligibility criteria to be considered in the systematic literature review. An average success rate between 89.4 % - 100 % was found in a total average of 5.2 years of follow-up. It can be concluded, to the best of our knowledge in the available scientific literature, that the treatment of adhesive restorations with composite resins in patients with severe wear is recommendable, focused on a short-medium term period (3-5 years), being a Inexpensive and minimally invasive treatment option.

Lesiones cervicales no cariosas: una revisión sistemática / Non carious cervical lesions: a systematic review

Introducción: las lesiones cervicales no cariosas (NCCL, por sus siglas en inglés) son un grupo de lesiones que afectan el área cervical del órgano dental causando hipersensibilidad dentinaria y defectos estéticos. Objetivo: analizar la literatura sobre las lesiones cervicales no cariosas, su etiología, consideraciones anatómicas, características morfológicas de la lesión y tratamientos no restaurativos. Material y métodos: se realizó una búsqueda en la base de datos PubMed, utilizando las palabras clave: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, recopilando un total de 78 artículos. Resultados: es necesario determinar la etiología antes de seleccionar las estrategias de tratamiento para las lesiones cervicales no cariosas. Conocer los distintos tipos de tejidos que componen al órgano dentario facilita la comprensión de los factores que participan en el desarrollo de las lesiones cervicales no cariosas. Esto permite que el tratamiento se enfoque más en la causa del problema que en los síntomas. Con esto podemos modificar diversos factores de manera interceptiva, los tratamientos de terapia con láser y compuestos tópicos son una estrategia mínimamente invasiva. Conclusiones: la mejor manera de describir a las lesiones cervicales no cariosas sería como una enfermedad multifactorial. Se debe prestar especial atención en los métodos de diagnóstico, identificando cofactores que propicien el avance de la lesión, como son la fricción y la biocorrosión. Esta revisión brinda datos que asocian a los factores oclusales como una de las principales causas de una enfermedad que afecta a más de la mitad de la población adulta (AU)

Introduction: non-carious cervical lesions (NCCL) are a group of lesions that affect the cervical area of the dental organ causing dentin hypersensitivity and cosmetic defects. Objective: to know, through a systematic review, the current state of non-carious cervical lesions. Material and methods: a search was conducted in the PubMed database, using the keywords: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, compiling a total of 78 articles. Results: determining etiology is necessary before selecting treatment strategies for non-carious cervical lesions (NCCL). Know the different types of tissues that make up the dentary organ, facilitate the understanding of the factors involved in the development of noncarious al cervical lesions. This allows treatment to focus more on the cause of the problem than on symptoms. With this we can modify various factors in an interceptive way, laser therapy treatments and topical compounds, are a minimally invasive strategy. Conclusions: the best way to describe non-carious al cervical lesions would be as a multifactorial disease to which special attention should be paid to both diagnostic methods, identifying cofactors that promote the progression of injury, such as friction and biocorrosion. This review provides data that associates occlusal factors as one of the main causes of a disease that affects more than half of the adult population (AU)

STUDY ON THE EFFECT OF BRASS AND COPPER ELECTRODES DURING ELECTRIC DISCHARGE MACHINING OF INCONEL 718 USING NANO PARTICLES MIXED DIELECTRIC FLUID.

Electrical Discharge Machine (EDM) parameters have a significant influence on machining characteristic like material removal rate (MMR) and tool wear rate (TWR). Inconel 718, which is widely used in the Medical, Marine, Architectural and food processing industries, is used as a work material. The tool electrode materials used are brass and copper. Experiments are conducted using face centered central composite design to determine the effects of process parameters like current rate, pulse on time, pulse off time and concentration of titanium carbide nano particle in dielectric fiuid. Based upon the experimental outcomes, the effect of brass and copper electrodes during electric discharge machining of Inconel 718 using nano particles mixed dielectric fiuid was investigated.

Cargas de trabalho de profissionais técnico-administrativos de uma instituição pública de ensino superior / Workloads of technical-administrative professionals at a public institution of higher education

Resumo: A saúde do trabalhador tem se deparado com novos desafios advindos, por exemplo, da pandemia da covid-19 e da indústria 4.0, o que implica na inevitabilidade de refletir sobre as cargas de trabalho nesse contexto. A dissertação que se segue tem como objetivo analisar as cargas de trabalho presentes no processo laboral dos técnico-administrativos de uma instituição pública de ensino superior no contexto da pandemia da covid-19. Sugere-se também reconhecer as estratégias utilizadas para o enfrentamento dessas cargas no meio laboral. Trata-se de uma pesquisa do tipo exploratória e descritiva, de natureza qualitativa. O estudo se dá na região sul do Brasil. Para esse fim, propõe-se a criação e testagem de um instrumento para identificar as cargas de trabalho que podem causar impactos negativos ou desgaste desses trabalhadores. Os pesquisadores Asa Laurell e Mariano Noriega (1989) orientam o referencial teórico do estudo, a partir do conceito de Cargas de Trabalho, classificadas em físicas, químicas, biológicas, mecânicas, fisiológicas e psíquicas. A coleta de dados se estabelece a partir da aplicação do instrumento criado, um questionário aplicado por meio de entrevista (presencial ou online), com 31 técnico-administrativos que exercem o cargo de secretário(a) nas coordenações de cursos de graduação de uma universidade pública federal. O tratamento dos dados se dá com base na Análise de Conteúdo Temática de Laurence Bardin (2016), com a proposição de duas categorias finais: a primeira sobre o reconhecimento das cargas de trabalho dos técnico-administrativos. Nessa categoria são apresentadas as cargas de trabalho que causam ou podem gerar algum tipo de desgaste nos trabalhadores. O percurso de investigação mostra que as cargas mais reconhecidas pelos trabalhadores pesquisados, a partir de sua percepção do processo de trabalho, são as psíquicas e fisiológicas, com atenção para as condições ergonômicas do trabalho. A segunda categoria, sobre as estratégias individuais e coletivas utilizadas por esses trabalhadores para o enfrentamento das cargas de trabalho, evidencia que os técnico-administrativos utilizam mecanismos individuais e coletivos como medidas protetivas contra os agravos decorrentes do labor, porém esses fatores de proteção requerem aprimoramento. Esses achados corroboram com o que traz a literatura sobre a presença dessas cargas nos ambientes de trabalho, principalmente nas áreas de prestação de serviços e atendimento a pessoas. Uma vez reconhecida a existência das cargas de trabalho, pode-se propor medidas de promoção à saúde e prevenção de doenças dos técnico-administrativos.

Abstract: Worker's health has faced new challenges arising, for example, the covid-19 pandemic and Health 4.0, which implies the inevitability of reflecting on workloads in this context. Therefore, the following dissertation aims to analyze the workloads present in the work process of administrative technicians at a public institution of higher education in the context of the covid-19 pandemic. It is also suggested to recognize the strategies used to face these workloads in the work environment. This is an exploratory and descriptive research, with a qualitative nature. The study takes place in the southern region of Brazil. This academic work proposes the creation and testing of an instrument (questionnaire) to identify the workloads that can cause negative impacts or cause wear on these Workers. Researchers Asa Laurell and Mariano Noriega (1989) guide the theoretical framework of the study, based on the concept of Workloads, classified as physical, chemical, biological, mechanical, physiological and psychological. For the data collection, the questionnaire was applied through interviews (in person or online), with 31 administrative technicians who work as secretary in the coordination of undergraduate courses at a federal public university. Data treatment is based on Laurence Bardin's Thematic Content Analysis (2016), with the proposition of two final categories: the first one is the recognition of administrative technical workers workloads. This category presents the workloads that cause or may generate some type of wear on workers. The investigation shows that the workloads most recognized by the surveyed, based on their perception of the work process, are psychic and physiological, with attention to the ergonomic conditions of work. The second category, about the individual and collective strategies used by these workers to handle with workloads, shows that the administrative technical workers use individual and collective mechanisms as protective measures against the damage resulting from work, but these protection factors require improvement. These findings corroborate with what the literature brings about the presence of these loads in work environments, especially in the areas of service provision and assistance to people. Once the existence of workloads is recognized, measures can be proposed to promote health and prevent diseases for these administrative technical workers.

Non-compliance for wearing spectacles: Prevalence and determinants in school-going children in South India

Purpose: To study the prevalence and determinants of compliance with spectacle wear among school?age children in South India who were given spectacles free of charge under a school vision screening program. Methods: A cross?sectional, descriptive study was performed. The participants were recruited from the school from Tirunelveli and Tuticorin districts of Tamil Nadu, where a school vision screening camp was conducted between January 2012 and October 2012. The school screening was performed under “Lavelle Pediatric Eye Care Project”. Of the 129,720 children examined of 249 schools, 4253 of children had refractive error and 3333 were prescribed and dispensed spectacles. A total of 683 children were interviewed, who were not wearing glasses on follow?up. Results: About 20% of the participants (683/3333) were not wearing their spectacles at examination. The most common reasons given for non?wear were lost (44.9%) or broken (35.3%) spectacles. There was no gender preference on compliance to spectacles. Conclusion: Compliance with spectacle wear is less even when spectacles are provided free of cost, particularly in children among the age group of 5–15 years. Because factors such as type of school, area (urban or rural), parent’s income, occupation, and their education were not significantly affecting the compliance of spectacle wear, proper encouragement and counseling of the parents and the child become extremely important.

The Wear on a Novel Motion Mode Hinged Knee Prosthesis: A Finite Element Analysis / 医用生物力学

Objective To perform finite element analysis on a novel motion mode hinged knee prosthesis, and investigate the method of wear simulation on hinged prosthesis and the influence of motion mode on wear of the prosthesis. Methods Based on the finite element model of contact stress on spherical axis prosthesis, the finite element model of wear was established according to Archard wear theory. The kinematics data during different motions were input as loading condition to simulate mechanical environment of the knee arthroplasty in physiological activities. The wear results of spherical axis prosthesis were studied. Results For tibial insert, the average and maximum contact stresses during upstairs and downstairs climbing were higher than those during walking, and the cumulative wear volume during upstairs climbing was larger than that during downstairs climbing and walking. The wear mainly occurred on lower surface of tibial insert during all 3 motions. For rotating bushing, there was only a short period of contact and wear during walking, and the cumulative wear was 0. 19 mm3. Conclusions The spherical axis motion of hinged knee prosthesis can improve the mechanical environment of knee, reduce the wear of rotating bushing, and prolong the prosthesis survival. The finite element simulation can predict the wear of hinged prosthesis effectively, and provide the theoretical basis for design and improvement of the prosthesis.

Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics / 北京大学学报(医学版)

OBJECTIVE@#To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application.@*METHODS@#Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05).@*RESULTS@#The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05).@*CONCLUSION@#The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.

The ability of different formulations of artificial saliva to protect dentin from erosive wear / Ação protetora de diferentes formulações de saliva artificial no desgaste erosivo

Objective: Evaluate the protective effect of artificial saliva formulations associated or not with mucin on dentin. Materials and Methods: Bovine dentin specimens were randomly allocated to 10 groups (n = 20) according to the artificial saliva tested and the presence or absence of mucin: Amaechi et al. (1998); Klimek et al. (1982); Vieira et al. (2005) and Eisenburger et al. (2001) and deionized water (control). Samples were submitted to an erosive cycle consisting of two immersions of 120 min in the saliva, followed by 1 min in hydrochloric acid solution, and new storage in saliva for 120 min. Surface loss (µm) was measured before and after the cycle. Data were analyzed using 2-way ANOVA and Tukey's test (p < 0.05). Results: A significant difference was observed for the saliva formulation but not for the presence of mucin. The deionized water provided the highest surface loss and the Eisenburger's saliva formulation the lowest. The groups testing the Amaechi, Klimek, and Vieira saliva did not present significant differences. Conclusion: Eisenburger's saliva formulation provides a higher protective effect against dentin erosion. The presence of mucin did not increase the erosion-preventive effect of artificial saliva formulations. (AU)

Objetivo: Avaliar o efeito protetor de formulações de saliva artificial associadas ou não à mucina sobre a dentina submetida a erosão. Material e Métodos: Espécimes de dentina bovina foram alocados em 10 grupos (n = 20) de acordo com a saliva testada e a presença ou ausência de mucina: . Amaechi et al. (1998); Klimek et al. (1982); Vieira e cols. (2005), Eisenburger et al (2001) e agua deionizada (controle). As amostras foram submetidas a um ciclo erosivo composto por duas imersões de 120 min na saliva, seguidas de 1 min em solução de ácido clorídrico e novo armazenamento na saliva por 120 min. A perda de superfície (µm) foi medida antes e depois do ciclo. Os dados foram analisados usando ANOVA 2 fatores e teste de Tukey (p <0,05). Resultados: Foi observada diferença significativa para a formulação de saliva, mas não para a presença de mucina. A água deionizada proporcionou a maior perda de superfície e a formulação de saliva de Eisenburger a menor. Os grupos que testaram a saliva Amaechi, Klimek e Vieira não apresentaram diferenças significativas entre si. Conclusão: A formulação de saliva de Eisenburger fornece o maior efeito protetor contra a erosão dentinária e a presença de mucina não aumentou o efeito preventivo de erosão de formulações de saliva artificial (AU).

Prevalence of dental caries, periodontal disease, malocclusion, and tooth wear in indigenous populations in Brazil: a systematic review and meta-analysis

Abstract The aim of this review was to evaluate the prevalence of dental caries, periodontal disease, malocclusion, and tooth wear in indigenous in Brazil. A systematic review of observational studies was performed according to the PRISMA guidelines (CRD42020218704). The search strategy involved the electronic databases of Embase, LILACS, PubMed, Web of Science, Scopus, and the CAPES Theses and Dissertations for gray literature. The eligibility criteria consisted of publications that assessed the prevalence of oral conditions in indigenous populations in Brazil. Studies with indigenous people living in urban area were excluded. The risk of bias was evaluated by using JBI Critical Appraisal for prevalence studies. Thirty studies were included in the review, and the majority showed a low risk of bias. A meta-analysis of 20 studies was conducted using the random-effects model and a 95% confidence interval. Several ethnicities were studied in isolation or in groups (n = 7,627 for dental caries; n = 2,774 for periodontal disease; n = 1,067 for malocclusion; n = 150 for tooth wear). The prevalence of caries ranged from 50% among indigenous people aged 18-36 months to 100% among those aged 65-74 years. The prevalence of periodontal disease ranged from 58% to 83%. The prevalence of malocclusion was 43%. Tooth wear was assessed in only one ethnic group and showed a prevalence of 100% in indigenous people aged >18 years. The certainty of evidence assessed by the GRADE system ranged from very low to moderate. This systematic review showed significant differences in the prevalence of dental caries, periodontal disease and malocclusion between indigenous population groups and territories in which indigenous people live.

Tooth wear due to dental attrition among 12-year-old adolescents / Desgaste dentário por atrição entre adolescentes de 12 anos de idade

Aim: To evaluate the prevalence and distribution of tooth wear due to dental attrition among 12-year-old adolescents according to their gender, reports of tooth grinding during sleep/while awake (bruxism), and sleep features related to sleep-disordered breathing. Methods: A cross-sectional study was conducted with 172 adolescents from southeast Brazil. Parents/caregivers answered questions about sociodemographic characteristics; reports of adolescents' tooth grinding during sleep, and sleep features (e.g. sleep duration and position, snoring, drooling on the pillow) in the previous two weeks. Adolescents self-reported the occurrence of tooth clenching/grinding while awake in the previous two weeks. Tooth wear due to dental attrition was assessed by a previously calibrated researcher, using a validated 5-point analogical ordinal occlusal/incisal tooth wear grading scale, with scores ranging from 0 (no wear) to 4 (loss of crown height ≥ 2/3), depending on tooth wear severity. Descriptive statistics and the Mann-Whitney test (p < 0.05) were performed to identify differences in tooth wear due to the distribution of dental attrition, according to adolescents' characteristics. Results: Most adolescents were female (58.0%) and 81.6% of the participants presented tooth wear due to dental attrition within the enamel. Adolescents who snored had a higher number of incisors with tooth wear due to dental attrition (p = 0.035). Females showed a higher number of canines with tooth wear due to dental attrition (p = 0.020). Adolescents whose parents reported tooth grinding during sleep presented a higher number of bicuspids with tooth wear due to dental attrition (p = 0.001). Conclusion:Tooth wear due to dental attrition within the enamel was observed in most adolescents. The distribution, depending on specific groups of teeth, was higher among female adolescents, adolescents' whose parents reported tooth grinding, and adolescents who snored during sleep.

Objetivos: Avaliar a prevalência e distribuição de DDA entre adolescentes de 12 anos de acordo com o sexo, relato de ranger de dentes durante o sono e vigília (bruxismo) e características relacionadas a desordens respiratórias do sono.Método: Desenvolveu-se um estudo transversal com 172 adolescentes do sudeste do Brasil. Seus pais/responsáveis responderam um questionário contendo informações sociodemográficas, relato sobre os filhos rangerem os dentes durante o sono e hábitos do sono dos filhos (duração do sono, posição que dorme, roncar, babar no travesseiro) nas duas últimas semanas. Adolescentes relataram ocorrência de ranger/apertar de dentes durante a vigília nas duas últimas semanas. DDA foi avaliado por um pesquisador previamente calibrado através de uma escala analógica ordinal de cinco pontos de desgaste dentário para faces oclusal/incisal previamente validada, com escores variando de 0 (sem desgaste) a 4 (perda da coroa em altura ≥ 2/3), dependendo da gravidade do desgaste. Análises descritivas e teste de Mann-Whitney (p < 0,05) foram realizados para identificar as diferenças na distribuição de DDA de acordo com as características dos adolescentes.Resultados: A maioria dos adolescentes eram meninas (58,0%) e 81,6% dos participantes apresentaram DDA em esmalte em algum elemento dentário. Adolescentes que rocavam apresentavam mais incisivos com DDA (p = 0.035). Meninas apresentaram maior número de caninos com DDA (p = 0.020). Adolescentes que rangiam os dentes durante a noite apresentaram maior número de pré-molares com DDA (p = 0.001).Conclusão: Desgaste dentário por atrição em esmalte foi observado na maioria dos adolescentes. A distribuição, dependendo de grupos de dentes específicos, foi maior entre meninas, adolescentes que roncavam durante o sono e que rangiam os dentes durante o sono.

Effect of 10% Proanthocyanidin gel on demineralized organic matrix degradation: ELISA method / Efeito do gel de Proantocianidina a 10% na degradação da matriz orgânica desmineralizada: método ELISA

Objective: This study evaluated Proanthocyanidin protective effect on dentin subjected to erosion and its inhibition on degradation of the demineralized organic matrix (DOM). Material and Methods: The tested groups were: G1 - 10% Proanthocyanidin gel (test group), G2 - 1.23% NaF (positive control 1), G3 - 0.012% Chlorhexidine (positive control 2) and G4 ­ Placebo (negative control with no active compound) and two methodologies were performed: contact profilometry and ICTP ELISA method. To quantify dentin wear, profilometry was performed. Data were submitted to Analysis of Variance followed by Fisher's LSD Test. To assess the collagen degradation, ICTP ELISA method was performed. Data were submitted to the Kruskal-Wallis followed by the Dunn ́s test. Simple linear regression and Pearson Correlation test were also performed (p<0.05). Results: The profilometry showed significantly lower wear of G1 when compared to other groups and G2, G3 and G4, which did not present significant difference among them. In the ICTP ELISA analysis, G1 and G4 did not show significant differences and the same happened between G2 and G3. However, G1 and G4 had lower values of collagen degradation compared to groups G2 and G3. Data showed that degraded DOM is a significant predictor to explain the values obtained through the ICTP ELISA. Conclusions: The results allow to verify that 10% proanthocyanidin provided less tooth wear and decreased degradation of the DOM, suggesting a good ability to prevent dentin erosion. The regression analysis also suggests that contact profilometry is a good strategy to quantify dentin wear (AU)

Objetivo: Este estudo avaliou o efeito protetor da proantocianidina na dentina submetida à erosão e sua inibição na degradação da matriz orgânica desmineralizada (MOD). Material e Métodos: Os grupos testados foram: G1 - gel de Proantocianidina 10% (grupo teste), G2 - NaF 1,23% (controle positivo 1), G3 - Clorexidina 0,012% (controle positivo 2) e G4 - Placebo (controle negativo sem princípio ativo) e duas metodologias foram realizadas: perfilometria de contato e método ICTP ELISA. Para quantificar o desgaste da dentina, a perfilometria foi realizada. Os dados foram submetidos à Análise de Variância seguida do Teste LSD de Fisher. Para avaliar a degradação do colágeno, foi realizado o método ICTP ELISA. Resultados: Os dados foram submetidos ao teste de Kruskal-Wallis seguido do teste de Dunn. Regressão linear simples e teste de correlação de Pearson também foram realizados (p<0,05). A perfilometria mostrou desgaste significativamente menor do G1 quando comparado aos outros grupos e G2, G3 e G4, que não apresentaram diferença significativa entre si. Na análise ICTP ELISA, G1 e G4 não apresentaram diferenças significativas e o mesmo ocorreu entre G2 e G3. No entanto, G1 e G4 apresentaram valores menores de degradação do colágeno em relação aos grupos G2 e G3. Os dados mostraram que a MOD degradada é um preditor significativo para explicar os valores obtidos pelo ICTP ELISA. Conclusão: Os resultados permitem verificar que a proantocianidina a 10% proporcionou menor desgaste dentário e diminuição da degradação da MOD, sugerindo uma boa capacidade de prevenir a erosão dentinária. Também sugere que a perfilometria de contato é uma boa estratégia para quantificar o desgaste da dentina (AU)

Fluorotic Enamel Susceptibility to Dental Erosion and Fluoride Treatment

Abstract The purpose of this in vitro study was to test the hypothesis that fluoride treatment can prevent dental erosion on fluorotic enamel of different severities. It followed a 3×2 factorial design, considering a) fluorosis severity: sound (TF0, Thylstrup-Fejerskov Index), mild (TF1-2), moderate (TF3-4); and b) fluoride treatment: 0 (negative control) and 1150ppmF. Human molars with the three fluorosis severities (n=16, each) were selected and randomly assigned to the two fluoride treatments (n=8). Enamel blocks (4×4mm) were prepared from each tooth and subjected to a dental erosion cycling model, for 10 days. The daily cycling protocol consisted of erosive challenges (1% citric acid, pH 2.4), interspersed by periods of immersion in artificial saliva, and three 2-minute treatments with either 0 or 1150ppm F. The enamel volume loss (mm3) was calculated by subtracting values obtained by microtomography before and after cycling. Two-Way ANOVA showed no significant interaction between fluorosis severity and fluoride treatment (p=0.691), and no significant effect for either fluorosis severity (TF0 mean±standard-deviation: 13.5(10-2±0.42(10-2, TF1-2: 1.50(10-2±0.52(10-2, TF3-4: 1.24(10-2±0.52(10-2, p=0.416) or treatment (0ppmF: 1.49(10-2±0.53(10-2; 1150ppmF: 1.21(10-2±0.42(10-2; p=0.093), when evaluated independently. Considering the limitations of this in vitro study, the presence and severity of fluorosis in enamel do not appear to affect its susceptibility to dental erosion. Fluoride treatment was not effective in preventing the development of dental erosion in both sound and fluorotic enamel substrates under our experimental conditions.

Resumo Este estudo in vitro foi testou a hipótese de que o tratamento com flúor pode prevenir a erosão dentária no esmalte fluorótico de diferentes severidades. O objetivo deste estudo foi: investigar o efeito protetor dos fluoretos contra a erosão e abrasão simuladas no esmalte fluorótico. Seguiu um desenho fatorial 3×2, considerando a) severidade da fluorose em 3 níveis: hígido (TF0, Índice Thylstrup-Fejerskov), suave (TF1-2), moderada (TF3-4); b) tratamento com flúor: 0 (controle negativo) e 1150ppmF. Molares humanos com as três severidades de fluorose (n=16, cada) foram selecionados e distribuídos aleatoriamente para os dois tratamentos com flúor (n=8). Blocos de esmalte (4×4mm) foram preparados a partir de cada dente e submetidos a um modelo de ciclo de erosão dentária, por 10 dias. O protocolo de ciclagem diária consistiu em seis desafios erosivos de 5 minutos (1% de ácido cítrico, pH 2,4), intercalados por seis períodos de imersão em saliva artificial e três tratamentos de 2 minutos com 0 ou 1150ppmF. O volume do esmalte perdido foi calculado subtraindo o perfil superficial 3D obtido por microtomografia antes e depois da ciclagem. A ANOVA de dois fatores não mostrou interação significativa entre a severidade da fluorose e o tratamento com flúor (p = 0,691) e nenhum efeito significativo para a severidade da fluorose (TF0 média+/desvio padrão: 13,5(10-2±0,42(10-2, TF1-2: 1,50(10-2±0,52(10-2, TF3-4: 1,24(10-2±0,52(10-2, p=0,416) ou tratamento (0: 1,49(10-2±0,53(10-2; 1150ppmF: 1,21(10-2±0,42(10-2, p=0,093), quando avaliados independentemente. Considerando as limitações deste estudo in vitro, a presença e severidade da fluorose no esmalte não parece afetar sua suscetibilidade à erosão dentária. O tratamento com flúor não foi eficaz na prevenção do desenvolvimento da erosão dentária em esmalte hígido e fluorótico, sob as condições experimentais utilizadas.

Wear of dental ceramics / Desgaste das cerâmicas odontológicas

Com base no desenvolvimento da odontologia adesiva, restaurações minimamente invasivas em cerâmica são utilizadas como alternativas para restaurar um dente. As cerâmicas odontológicas são amplamente aplicadas na área odontológica principalmente devido à sua estética e resistência mecânica. Uma das propriedades da cerâmica a ser bem conhecida antes de seu uso, é a resistência ao desgaste que deve ser compatível com o comportamento de desgaste do antagonista para evitar desempenhos indesejados. Portanto, vários métodos têm sido realizados para avaliar o comportamento do desgaste dos materiais cerâmicos considerando diferentes condições presentes no complexo meio oral. Este estudo teve como objetivo compilar os métodos utilizados para investigar o desgaste das cerâmicas odontológicas e descrever os mecanismos de desgaste envolvidos nos mesmos. A obtenção e análise de dados também é abordada para discutir os resultados obtidos a partir de diferentes métodos, bem como a análise clínica do desgaste e perspectivas futuras sobre esse tema. Em conclusão, muitas metodologias estão disponíveis para medir o desgaste cerâmico. Portanto, os métodos devem ser selecionados com base na relevência clínica de cada estudo e devem seguir parâmetros previamente relatados para padronização, permitindo a comparação da literatura (AU)

Based on the development of adhesive dentistry, minimally invasive restorations in ceramics are used as alternatives to restore a tooth. Dental ceramics are largely applied in the dentistry field mainly due to their esthetic and mechanical strength. One of the ceramic properties to be well known before its use is the wear resistance that should be compatible with the antagonist wear behavior to avoid unwanted performance. Therefore, several methods have been performed to assess the ceramic materials wear behavior considering different conditions present in the complex oral medium. This study aimed to compile the methods used to investigate dental ceramics wear and to describe the wear mechanisms involved on them. Obtaining and analyzing data is also addressed to discuss the results obtained from different methods, as well as the clinical analysis of wear and future perspectives on this topic. In conclusion, many methodologies are available to measure the ceramic wear. Therefore, the methods must be selected based on the clinical significance of each study and should follow previously reported parameters for standardization, allowing literature comparison. (AU)

Facetas de desgaste por atrição em criancas brasileiras e má oclusão: um estudo trasnversal / Attribution wear facets in brazilian children and malocclusion: a transversal study / Hechos de gasto de atracción en niños brasileños y mal occusión: un estudio trasnversal

O objetivo do estudo foi avaliar a associação entre facetas de desgaste por atrição e má oclusão em escolares brasileiros. Este estudo transversal realizado com 433 escolares de 8 a 10 anos, junto a seus pais/responsáveis, das redes pública e privada na cidade de Diamantina. Informações sobre sociodemográfico da família da criança e saúde geral da criança foram colhidos a partir de um questionário previamente estruturado, direcionado aos pais/cuidadores. Foram realizados exame intrabucal em cada criança para avalição da presença de facetas de desgaste por atrição, perda de tecido dentário por erosão, ausência/presença de má oclusão e traumatismo dentário. Os resultados foram obtidos a partir da análise descritiva de frequência absoluta e relativa dos dados e analise de Regressão de Poisson (IC 95%; p<0,05). Os resultados mostraram uma prevalência de crianças com facetas de desgaste de 73,7%, a sobressaliência anterior superior (RP= 1,16; IC: 95%; 1,03-1,31; p= 0,014) e a relação molar (RP=1,15; IC 95%: 1,00­1,29; p=0,030) associadas a presença de facetas de desgastes por atrição, e o apinhamento dentário (RP: 0,87; IC: 95%; 0,78-0,98; P= 0,023) um fator de proteção para a facetas de desgaste em escolares, independentemente do sexo e idade da criança. Os resultados do presente mostraram que a alta prevalência de facetas de desgaste, sendo a sobressaliência anterior superior e a relação molar associadas a presença desse desgaste dentário. Dessa forma, os dados sinalizam a necessidade dos cirurgiões-dentistas estarem atentos a presença de desgaste fora dos padrões fisiológicos e relacionados a presença de má-oclusão.

The aim of the study was to evaluate the association between attrition wear facets and malocclusion in Brazilian schoolchildren. This cross-sectional study was carried out with 433 schoolchildren aged 8 to 10 years, along with their parents/guardians, from public and private schools in the city of Diamantina. Information about the child's family sociodemographic and general health was collected from a previously structured questionnaire, directed to parents/caregivers. Intraoral examinations were performed on each child to assess the presence of attrition wear facets, loss of dental tissue by erosion, absence/presence of malocclusion and dental trauma. The results were obtained from the descriptive analysis of absolute and relative frequency of data and Poisson Regression analysis (95% CI; p<0.05). The results showed a prevalence of 73.7% of children with wear facets, superior anterior overjet (PR= 1.16; CI: 95%; 1.03-1.31; p= 0.014) and molar relationship ( PR=1.15; 95% CI: 1.00­1.29; p=0.030) associated with the presence of attrition wear facets, and dental crowding (PR: 0.87; CI: 95%; 0. 78-0.98; P= 0.023) a protective factor for wear facets in schoolchildren, regardless of gender and age of the child. The present results showed that the high prevalence of wear facets, with superior anterior overjet and molar relationship associated with the presence of this tooth wear. Thus, the data indicate the need for dentists to be aware of the presence of wear outside of physiological standards and related to the presence of malocclusion.

objetivo del estudio fue evaluar la asociación entre las facetas del desgaste por atracción y la pobre oclusión en las escuelas brasileñas. Este estudio transversal se llevó a cabo con 433 escuelas de 8 a 10 años de edad, con sus padres/directores, en redes públicas y privadas de la ciudad de Diamantina. La información sobre la sociodemografía familiar del niño y la salud general del niño se recopiló a partir de un cuestionario preestructurado dirigido a los padres y cuidadores. En cada niño se realizó un examen intraabucal para evaluar la presencia de rasgos de desgaste, pérdida de tejido dental por erosión, ausencia/presencia de maloclusión y trauma dental. Los resultados se obtuvieron a partir del análisis descriptivo de la frecuencia absoluta y relativa de los datos y análisis de la regresión de Poisson (IC 95%; p<0,05). Los resultados mostraron una prevalencia de niños con facetas de desgaste del 73,7%, sobresaliencia anterior superior (RP= 1,16; IC del 95%; IC del 1,03-1,31; p= 0,014) y relación molar (RP=1,15; IC del 95%: 1,00-1,29; p=0 030) asociada a la presencia de facetas de fragancia por atracción, y de plomería dental (RP: 0,87; IC: 95%; 0,78-0,98; P= 0,023), un factor de protección para las facetas de desgaste en las escuelas, independientemente del género y la edad del niño. Los resultados de la presente muestra que la alta prevalencia de las facetas desgaste, con la proyección de legado superior y la relación molar asociada con la presencia de este desgaste dental. Así pues, los datos indican la necesidad de que los cirujanos dentales estén alerta ante la presencia de desgaste y desgaste fuera de las normas fisiológicas y relacionados con la presencia de maloclusión.

Effects of different toothpaste formulations on erosive tooth wear prevention: systematic review / Efeitos de diferentes dentifrícios na prevenção do desgaste dentário erosivo: revisão sistemática de literatura

Objective: erosive tooth wear is a multifactorial condition that results in loss of dental hard tissue, caused by a chemical and mechanical process. This paper aims to carry out a systematic review presenting the effects of different toothpaste formulations on the loss of dental enamel surface in vitro. Material and Methods: the searches were performed in the databases PubMed, Web of Science, LILACS and Scielo. Articles published from 2010 to 2020 were filtered, without language restriction. Articles that included abrasion and erosion protocols were searched, as they were more similar to clinical reality, since toothpaste is applied through tooth brushing. The searches with descriptors and free terms on the topic resulted in 992 articles, however only 12 were within the search criteria. Results: the selected studies appointed that association of conventional fluorides (NaF) with metallic fluorides can be a promising strategy for the reduction of surface loss by erosive tooth wear. Toothpastes containing sodium fluoride, as well as tin without chitosan, showed a reduction in surface loss, considered sufficient for individuals with medium exposure to acids. In children's toothpastes, the one containing sodium fluoride showed a reduction in surface loss when compared to non-fluoride dentifrices. Conclusion: different protocols may result in less or greater loss of enamel surface, and methodological differences should be considered. To clarify the effects of dentifrices on erosive tooth wear, other properties of dentifrices should be investigated. (AU)

Objetivo: o desgaste erosivo é uma condição multifatorial que resulta em perda de tecido duro dentário, causado por um processo químico e mecânico. Este trabalho tem como objetivo realizar uma revisão sistemática de literatura apresentando os efeitos de diferentes formulações de dentifrícios na perda de superfície de esmalte dentário in vitro. Material e Métodos: a busca foi realizada nas bases de dados PubMed, Web of Science, LILACS e Scielo. Foram filtrados artigos publicados no intervalo de 2010 a 2020, sem restrição de idioma. Buscou-se artigos que incluíssem protocolos de abrasão e erosão, por mais se assemelhar a realidade clínica, uma vez que o dentifrício é aplicado através da escovação dentária. A busca com descritores e termos livres sobre o tema encontrou 992 artigos, entretanto somente 12 estavam dentro dos critérios da pesquisa. Resultados: os estudos selecionados apontaram que associação dos fluoretos convencionais (NaF) com os metálicos pode ser uma estratégia promissora para a redução de perda de superfície pelo desgaste dentário erosivo. Dentifrícios contendo fluoreto de sódio, assim como estanho sem quitosana, apresentaram redução na perda de superfície, sendo considerada suficiente para indivíduos com exposição média aos ácidos. Em dentifrícios infantis, aquele que continha fluoreto de sódio apresentou uma redução de perda de superfície quando comparado com dentifrícios sem fluoreto. Conclusão:diferentes protocolos podem resultar em menor ou maior perda de superfície de esmalte e as diferenças (AU)

Longitudinal assessment of dental erosion-abrasion by cross-polarization optical coherence tomography in vitro

Abstract: This study tested a novel in vitro dental erosion-abrasion model and the performance of cross-polarization optical coherence tomography (CP-OCT) in longitudinally monitoring the simulated lesions. Thirty human enamel specimens were prepared and randomized to receive three dental erosion-abrasion (EA) protocols: severe (s-EA, lemon juice/pH:2.5/4.25%w/v citric acid), moderate (m-EA, grapefruit juice/pH:3.5/1.03%w/v citric acid) and no-EA (water, control). EA challenge was performed by exposing the specimens to acidic solutions 4x/day and to brushing 2x/day with 1:3 fluoridated toothpaste slurry, for 14 days. Enamel thickness measurements were obtained using CP-OCT at baseline (D0), 7 (D7) and 14 days (D14) and micro-computed tomography (micro-CT) at D14. Enamel surface loss was measured with both CP-OCT and optical profilometry at D0, D7 and D14. Data was analyzed with repeated-measures ANOVA and Pearson's correlation (r) (α = 0.05). CP-OCT enamel thickness decreased over time in the s-EA group (D0 >D7 > D14, p < 0.001) and m-EA group (D0 > D14, p = 0.019) but did not change in the no-EA group (p = 0.30). Overall, CP-OCT and micro-CT results at D14 correlated moderately (r = 0.73). CP-OCT surface loss was highest for s-EA (p <0.001) but did not differ between moderate and no-EA (p = 0.25). Enamel surface loss with profilometry increased with severity (no-EA>m-EA>s-EA, p < 0.001). D14 surface loss was higher than D7 for both methods except for the no-EA group with profilometry. CP-OCT and profilometry had moderate overall correlation (r = 0.70). Our results revealed that the currently proposed in vitro dental erosion-abrasion model is valid and could simulate lesions of different severities over time. CP-OCT was a suitable method for monitoring the EA lesions.

Possibilidades reabilitadores para pacientes com erosão dental: uma revisão de casos clínicos / Rehabilitation possibilities for patients with dental erosion: a clinical case review / Posibilidades rehabilitadoras para pacientes con erosión dental: revisión de casos clínicos

Objetivo: revisar na literatura as possibilidades reabilitadoras para pacientes com erosão dental. Método: screeningda literatura que seguiu os princípios do check listSANRA. A pesquisa foi realizada nas bases de dados da BVS (LILACS e BBO), Scielo, Cochrane Library e via buscador de pesquisa PubMed. Foram incluídos estudos na língua inglesa, relatos de casos clínicos disponíveis na íntegra. Foram realizadas buscas por artigos publicados até fevereiro de 2022 e sem restrição cronológica. Resultados:entre44 artigos identificados, 10 foram selecionados. A maioria dos estudos (40%) foram publicados no Brasil, seguido dos Estados Unidos (20%) e Itália (20%). As possibilidades de reabilitação identificadas foram o uso de coroas de cerâmica, laminados cerâmicos e restauração direta com resina composta. Conclusão:foi possível verificar que a reabilitação dos elementos dentários com materiais diretos (resinas compostas) ou indiretos (cerâmica ou cerômeros) tem demonstrado resultados satisfatórios,conforme os casos clínicos investigados.

Objective: to review the literature on rehabilitative possibilities for patients with dental erosion.Method: literature screening thatfollowed the principles of the SANRA check list. The search was performed in the BVS (LILACS and BBO), Scielo, Cochrane Library and PubMed databases. English language studies and clinical case reports available in full were included. Articles published until February 2022 and without chronological restriction were searched.Results: among 44 articles identified, 10 were selected. Most studies (40%) were published in Brazil, followed by the United States (20%) and Italy (20%). The rehabilitation possibilities identified were the use of ceramic crowns, ceramic laminates and direct restoration with composite resin.Conclusion: it was possible to verify that the rehabilitation of dental elements with direct materials (composite resins) or indirect (ceramics or ceromers) has shown satisfactory results, according to the clinical cases investigated.

Objetivo: revisar la literatura sobre las posibilidades rehabilitadoras para pacientes con erosión dental.Método: screeningbibliográfico que siguió los principios de la check listSANRA. La búsqueda se realizó en las bases de datos BVS (LILACS y BBO), Scielo, Cochrane Library y PubMed. Se incluyeron estudios en inglés, informes de casos clínicos disponibles en su totalidad. Se realizaron búsquedas de artículos publicados hasta em Febrero de 2022 y sin restricción cronológica.Resultados: de los 44 artículos identificados, se seleccionaron 10. La mayoría de los estudios (40%) se publicaron en Brasil, seguido de Estados Unidos (20%) e Italia (20%). Las posibilidades de rehabilitación identificadas fueron el uso de coronas cerámicas, laminados cerámicos y restauración directa con resina compuesta.Conclusión:se pudo comprobar que la rehabilitación de elementos dentales con materiales directos (resinas compuestas) o indirectos (cerámicas o cerómeros) ha mostrado resultados satisfactorios, según los casos clínicos investigados.

Prevalence and Development Factors of Increased Tooth Abrasion in Residents of Kaspiysk

Background: Loss of hard tissues is diverse in its localization and can manifest itself in the area of one, several or all of the patient's teeth, one of the most serious consequences of this pathology is a decrease in the height of the lower third of the face. Materials and Methods: The paper presents the results of a comprehensive dental examination and survey data of 98 patients. During the study, patients were divided by age groups, gender characteristics, pathological disorders and depending on the plane of erasure (horizontal, vertical, mixed) teeth. The prevalence and factors of the development of increased abrasion of hard tissues of teeth were determined. Conclusion: Local exogenous and general endogenous factors turned out to be a more frequent cause of increased tooth abrasion for residents of the city of Kaspiysk.

Self-Report of the perception of stress and signs of bruxism generated during the pandemic in student of the health area / Autoinforme de la percepción de estrés y signos de bruxismo derivados de la pandemia en estudiantes del área de la salud

Abstract Bruxism is the repetitive muscle-mandibular behavior characterized by clenching and/or grinding of the teeth, which reflects the presence of one or more underlying conditions or factors. The objective of this descriptive study was to determine the association between bruxism and stress self-perceived during the pandemic, as well as their frequency by gender and academic area. An interrogation and self-perceived stress scale PSS-14 were applied to students from the different areas of the Institute of Health Sciences (ICSa) to determine the presence or absence of stress and bruxism symptom, a Chi-square was used for the comparison between variables, considering a value of p0.005. ICSa students between 18 and 24 age perceive symptoms of bruxism and high levels of stress caused during the pandemic.

Resumen El bruxismo es el comportamiento músculo-mandibular repetitivo caracterizado por apretamiento y/o rechinamiento de los dientes, que refleja la presencia de una o varias condiciones o factores subyacentes. Se realizó un estudio descriptivo con el objetivo de determinar la asociación del nivel de estrés y síntomas de bruxismo autopercibidos durante la pandemia, así como su frecuencia por género y área académica. Se aplicó un interrogatorio y escala de estrés percibido PSS-14 a los estudiantes de las distintas áreas del Instituto de Ciencias de la Salud (ICSa) para determinar la presencia o ausencia de estrés y síntomas de bruxismo, se utilizó una Chi-cuadrada para la comparación entre variables, considerando significativo un valor de p0.0001. Los estudiantes de 18 a 24 años de edad del ICSa perciben síntomas de bruxismo y altos niveles de estrés originados durante la pandemia.